Compatible Modules for
Juniper Compatible 10G SFP+ Transceivers for EX & QFX Switches
10G SFP+ transceivers programmed with Juniper-compatible EEPROM coding for EX and QFX switches, plus 10G BiDi pairs for single-fiber spans. Send your switch model and Junos version — we code and test before shipping.
Independent third-party compatible modules. We do not claim compatibility with every model from this brand; we confirm the exact device model, port, software version and coding before shipping. Not OEM-original unless quoted.
Recommended module families
10GBASE-SR/LR campus uplinks on EX switches and 10G server-facing ports on QFX leaf switches
10G BiDi pairs where only one fiber strand links EX/QFX sites
1.25G SX/LX SFP for EX-series access ports and OOB management
Vendor part numbers we replace
Vendor part numbers are cited for cross-reference only; Fibertrixa is not affiliated with any switch vendor.
| Vendor reference | Standard | Fibertrixa equivalent |
|---|---|---|
| EX-SFP-10GE-SR | 10GBASE-SR, 850 nm MMF | SFP-10G-SR-MM850-300M ↗ |
| EX-SFP-10GE-LR | 10GBASE-LR, 1310 nm SMF 10 km | SFP-10G-LR-SM1310-10KM ↗ |
| QFX-SFP-10GE-SR | 10GBASE-SR, 850 nm MMF | SFP-10G-SR-MM850-300M ↗ |
What to send for compatibility confirmation
- Exact switch or router model
- Port or slot number
- Software or firmware version
- Original part number or required coding
- Fiber type and link distance
How we ensure compatibility
01
Share your exact model
Send the switch or router model — from the label or a show/display version output — with your inquiry.
02
We code and verify
The module is coded for your platform and checked against our compatibility records before dispatch.
03
Sample or volume
Start with samples to validate in your own network, then scale to volume with a 3-year warranty.
Frequently Asked Questions
- Will a Fibertrixa module work in my Juniper EX switch?
- We code each order to the switch model and Junos version you provide. Send us the exact model before ordering; compatibility for untested platforms is confirmed case by case.
- Do Juniper switches block third-party optics?
- Behaviour depends on platform and Junos release. Many platforms accept compatible optics; some may log warnings. Tell us your model so we can advise per platform.
- Does DDM/DOM work on our modules?
- Yes. Our SFP+ modules support digital diagnostics, readable with standard Junos interface diagnostics commands.
- Can I mix Fibertrixa and Juniper original optics on one link?
- Yes, as long as both ends use the same standard (e.g. 10GBASE-LR) and wavelength. BiDi modules must be used in matched pairs.
- What do I need to send for a quote?
- Switch model, Junos version, original part number or required standard/reach, quantity and destination country.